DIVERTEK 900 A

Submersible multi-impeller pump for clean water, designed for pressurization, rainwater reuse, gardening and irrigation in residential building service.
This pump is ideal for the use in rainwater recovery systems and for drawing water from a cistern or a tank.
Available in manual or automatic version with floats.
The automatic version has a single-phase motor and a float switch for protection against dry running.
It does not require a control panel.
The starting capacitor is accessible without disassembling the pump; the motor has integrated thermal protection against overheating.
The pumps is equipped with retractable carrying handle, technopolymer anti-debris filter, non-return valve and 15 meter power cable with Shuko plug.
A four-section reducer fitting is supplied as standard.

Flow rate:
from 1 m3/h to 6,3 m3/h (500 version)
from 1 m3/h to 6 m3/h (650 version)
from 1 m3/h to 6,3 m3/h (900 version)
Head up to:
45 m (900 version)
30 m (650 version)
25 m (500 version)
Maximum immersion depth: 12 m
Type of pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
Liquid temperature range: from 0°C to +40°C
Maximum operation depth: 15 m
Flanges, thread: 1" (supplied as standard with a four-section fitting-reducer)
Pump maximum diameter: 160 mm
Impeller/s material: technopolymer
Maximum number of starts: 20/h
Protection class: IP 68
Motor insulation class: F
Single phase power input: 230 V 50 Hz
Power cable (m) and plug: 15 m H07RNF with power plug
Possible type of installation: fixed or movable in vertical position
Special versions on request: cable of different lengths, different type of power plug

Motor
Make	DAB
Main category	1~ motor
Motor design	1 PH DM STD
Frequency, poles	50 Hz - 2 poles
Motor	DIVERTEK 900/900 A - 0.56 2p M (0,56 kW)
Degree of protection	IP 68
Type of protection	--
Electrical connection	220-240 V
Type of installation
Name	DIVERTEK
Material combination
Material combination	Divertek
Pump body	Technopolymer
Impeller	Technopolymer/AISI 304
Diffuser	Technopolymer
Motor shaft	Stainless Steel AISI 416
O-Ring	EPDM
Base	Technopolymer
Motor top body	Stainless Steel AISI 304
Inspection cap	EPDM
Nut	Stainless Steel A2
Washer	Stainless Steel A2
Stage housing	Technopolymer
Wear ring	Technopolymer
Pump shaft	Stainless Steel AISI 303
Diffuser plug	Technopolymer
Motor flange	Technopolymer
Mechanical seal	Impregnated carbon-resin/Ceramic/NBR
Cover	Technopolymer
Insert	Brass
Capacitor compartment cover	Technopolymer
Handle	Technopolymer
Pipe connections
Outlet	1 " G
Outlet
Flange standard	PN/DN
Pressure rating	--
Nominal pipe size	1 " G
Product version
Product version	A